EN © 2021 SMARTY KID.
All rights reserved.
Dog powerbank
8
4. Device construction
1.
USB socket (output)
2.
microUSB socket (input)
3.
Indicator lights (below the
housing surface)
Do not connect the device with
visible mechanical damage or if
you notice the device is over.
While charging the battery of the
powerbank using it to charge other
devices is impossible.
5. Powerbank operation
5.1 Charging the powerbank
Charge the battery to the full before the first use. Several charging and discharging cycles
may be necessary to achieve full battery capacity. Avoid excessive battery discharge. This
can damage the battery or shorten its service life.
The device can heat up during charging.
It is a regular occurrence and should not affect the
stability or performance of the device. Do not leave the device to be charged unattended as
this may result in fire, damage to the device or its surroundings etc.
Charging procedure:
1.
Connect the micro USB plug of the supplied USB cable to the micro USB socket of
the powerbank.
2.
Connect the other end of the cable to the powered USB adapter or, for example, a
free USB port on your computer.
3.
The powerbank has a charging LED next to the USB ports - it flashes red while
charging. When charging is complete, the LED lights up continuously in red.
4.
Disconnect the USB cable after charging.
5.2 Charging devices using Powerbank
Devices charging procedure:
1.
Connect the USB cable to the USB output port on the powerbank.
2.
Connect the other end of the cable to the device you want to charge. After
connecting the device, the blue LED in the powerbank will light up continuously.
3.
When the battery in the charged device is full or the energy in the powerbank is
exhausted, disconnect the USB cable from the device.
6. Troubleshooting
Connected
device does not
charge
The battery in Powerbank might be discharged.
The connection cable is incorrectly connected or
damaged.
I cannot charge
the powerbank
Check that the power supply is functioning correctly.
The connection cable is incorrectly connected or
damaged.
If the problem persists, contact producent service centre.
1
2
3
