18
SVC400P/SVC800P - User Manual
For TIMER type, if the setting for boot up time is 6:00:00 and shut down time is 11:00:00. After the
DVR is OFF, reboot up the DVR and DVR will check the system for 5 min and then shut down
again, you must enter into this menu to change the TYPE to be ignition. Anyway, if the time for
reboot up the DVR is not during 6:00:00 to 11:00:00, then DVR will shutdown in 5 min.
BUZZER SWITCH:
ON means the buzzer will alarm when alarm happens
IDLE TIME (SEC):
The time for the operation interface remaining idle before switching to the live
view.
EVENT FILES AUTO-EXPORT (USB):
Reserve Use
Scroll to
SAVE
to confirm the changes
C)
REGISTER INFO
UNIT S/N:
The series Number for DVR. One DVR has only one S/N. This number is taken from a special
encrypted chip.
UNIT ID:
Device ID. Use the
NUMERIC
keypad to enter the system ID from 00000 to 99999. This ID is
used when logging in to the unit (if security is enabled, set as yes).
COMPANY NAME:
The name of company: Press the arrow key on the remote control and highlight this
option and then input the name of the company.
VEHICLE NO.:
The number of the vehicles.
DRIVER/ROUTE NAME:
The driver
’s name and the route name
VEHICLE S/N FOR CMS:
This is very important for CMS. Only this number can be recognized by CMS
Please Note:
when you connect DVR to CMS ensure sure
Vehicle No
. and
Vehicle S/N
are not left blank ,
otherwise the CMS will not be able to register the SVC400P.
Scroll to
SAVE
to confirm the changes
