3333
SWE4 Series
SWE8 and SWE16 Series
Qty
Accessories
Qty
Accessories
1
User Manual
1
User Manual
1
IR Remote Controller
1
IR Remote Controller
1
RemoteAgent CD
1
RemoteAgent CD
1
Power Cable
1
Power Cable
2
Power Battery (AAA Size)
2
Power Battery (AAA Size)
1
Rubber Mount Set
1
Rubber Mount Set
1
Rack Mounts and Screws
3. CONNECTING YOUR SMARTWATCH™ UNIT
Install the SWE Series on a flat surface. If required, attach the rubber mount for installation. If a 19-inch rack is used, it is
recommend to install the system on a shelf and use 2.5~3U (1U=1.75 inch or 4.45cm) space for proper ventilation.
Note
Install the system in a location with good ventilation to prevent overheating.
SWE4 Series
No.
Name
Description
1
VIDEO-IN (BNC)
Connect camera. (Supports NTSC/PAL)
2
LOOP-OUT
Camera images of each channel will be outputted as is. Also, used when the
corresponding image is required for other product.
3
MON-OUT
Connect to the main monitor for camera image for
surveillance/management/playback.
4
SPOT-OUT
Use to output the entire surveillance screen one by one, in an interval.
5
S-VIDEO
Connect to S-Video input terminal to output image of the main monitor.
6
Select NTSC / PAL
Select the signal system. (NTSC / PAL)
7
AUDIO IN
Connect Audio Input Device. (with Amp.)
8
AUDIO OUT
Connect Audio Output Device. (with Amp.)
9
ALARM/ SENSOR /RS-485 Terminal to connect external input sensor of 1~4 channel. (Supports N/O or N/C)
Connect RS-485 signal output or relay for P/T/Z camera control.
10
SERIAL Port
RS-232 port
11
LAN Port
10/100 Ethernet connection terminals for remote connection.
12
Power Input
Power cable connection terminal for connecting to main power.
13
Power Switch
Switch to change input power. (115/230V)