Smartwatch H20NV8, Руководство по установке, Страница: 15 / 172

SmartWatch® Network Video Recorder User Manual
15
No. Name Description
8 INFO Button
Reserved.
9 VOIP Button To switch between the main and spot output.
In PTZ Control mode, it can be used as zoom.
10 MENU Button To return to the main menu.
Press and hold the button for 5 seconds will turn off the audible key beep.
In PTZ Control mode, the MENU/WIPER button will start wiper (if
applicable).
In Playback mode, it is used to show/hide the control interface.
11 PREV Button Switch between single screen and multi-screen mode.
In PTZ Control mode, it is used to adjust the focus in conjunction with the
A/FOCUS+ button.
12 DIRECTION Button Navigate between different fields and items in menus.
In the Playback mode, the Up and Down button is used to speed up and
slow down recorded video. The Left and Right button will select the next
and previous record files.
In Live View mode, these buttons can be used to cycle through channels.
In PTZ control mode, it can control the PTZ direction.
ENTER Button Confirm selection in any of the menus.
It can also be used to tick checkbox fields.
In Playback mode, it can be used to play or pause the video.
In single-frame Playback mode, pressing the button will forward the
video to the next frame.
13 PTZ Button In Auto-switch mode, it can be used to stop /start auto switch.
14 ESC Button Back to the previous menu.
Press for Arming/disarming the device in Live View mode.
15 RESERVED
Reserved for future usage.
16 F1 Button Select all items on the list when used in a list field.
In PTZ Control mode, it will turn on/off PTZ lamp (if applicable).
In Playback mode, it is used to switch between play and reverse play.
17 PTZ Control Buttons
Buttons to adjust the iris, focus and zoom of a PTZ camera.
18 F2 Button Cycle through tab pages.
In synchronous playback mode, it is used to switch between channels.
Troubleshooting Remote Control:
Make sure you have installed the batteries correctly in the remote control. The IR receiver in the front panel.
If there is no response after you press the remote, follow the procedure below.
Steps:
1. Go to Menu > Settings > General > More Settings by using the mouse.
2. Check and remember the NVR ID#. The default ID# is 255. This ID# is valid for all the IR remote controls.
3. Press the DEV button on the remote control.