SmartWatch® IP Network Camera User Manual
10
10
2.2
Setting the IP network camera over WAN
This section explains how to connect to the IP network camera via WAN with a static
IP or a dynamic IP.
2.2.1
Static IP Connection
Before you start:
Please apply for a static IP from an ISP (Internet Service Provider). With the static IP
address, you can connect the IP network camera via a router.
Connecting the IP network camera via a router
Steps:
1.
Connect the IP network camera to the router.
2.
Assign a LAN IP address, the subnet mask and the gateway. Refer to
Section 2.1.2
Detecting and Changing the IP Address
for detailed IP address configuration of
the camera.
3.
Save the static IP address in the router.
4.
Set port mapping, e.g., 80, 8000, 8200 and 554 ports. Port mapping will vary
depending on what router you have. Please refer to the router manufacturer.
5.
Connect to the IP network camera through a web browser or the client software
over the internet.
Figure 2-4
Accessing the Camera through Router with Static IP
Connecting the IP network camera with static IP directly
You can also save the static IP address in the camera and directly connect it to the
internet without using a router. Refer to
Section 2.1.2
Detecting and Changing the IP
Address
for detailed IP address configuration of the camera.
Figure 2-5
Accessing the Camera with Static IP Directly
