Smartwares DVRCAR25, Инструкция по эксплуатации

Страница: 3 / 8

1) Charging
A) Using the built-in rechargeable lithium battery
Charging options:
1) Connect the Dash Cam to the car charger;
2) Connect the dash cam to your computer using the USB cable
- When charging through the car charger, the ‘battery’ display in the bottom right of the screen will
flash – indicating that the unit is charging
- A red light will illuminate on the left side of the Dash cam whenever the camera is charging
(Note: For first charge a minimum of 6 hours is recommended)
B) The Dash Cam connected to the 12v car charger
When the 12v car charger is plugged into your vehicle’s 12v outlet and the dash cam is connected;
after starting the car, the device automatically turns on and enters video mode -- it will begin to
record. The device will continue recording while charging. When the car is turned off, the device
keeps working and will turn off five seconds later, saving the recorded files automatically (if your
vehicle’s 12v outlet stays active when the car is turned off, it is recommended to unplug your Dash
Cam before leaving your car). Alternatively you can choose to turn the camera off using the power
button the files will be automatically saved.
Note: The Dash Cam is designed to be plugged in continually while driving; leaving the unit
plugged in for long periods of time will not harm the camera.
2) Functions introduction
This camera has three modes: Video mode, Still Photo mode, Playback mode
To switch between modes, when the camera is NOT recording, press the MODE button
A) Video mode: (a video camcorder icon will display in the top left of the screen. Memory
card must be inserted) After pressing and holding the power button, or connecting Dash Cam to
the car charger, the camera turns on and enters video mode. Dash cam will automatically begin
recording. To stop recording, press the OK button. . To turn off the device, press and hold the
power button. . Whether you stop recording using the OK button or you simply power down
Dash Cam using the power button, your video will be stored.
Note: Pressing the OK button in video mode starts and stops recording.
Note: Pressing the mode button while Dash Cam is recording will lock and store the current video
– the top of the screen will display this lock key icon. This video will not be overwritten until
the memory card is formatted.
Note: A quick press (less than one second) of the power button while recording changes Dash
Cam from day mode to night mode (the following icon will display on the top of the display screen
when in night mode
Note: Pressing the up button while recording will zoom the camera in up to 4x digital zoom.
Press the down button to zoom out.
Note: The menu button has no function while the camera is recording.