Appendix A: Touch Keypad Operation Table
Function
Enter Key
Explanation
ARM Mode
Enter PIN code +
Exit Delay: Arm Key LED flashes and beeps
(faster beeps at last 5 second countdown)
ARM Mode: Arm Key LED turns on
Partial Arm
Mode
Enter PIN code +
Exit Delay: Arm Key LED flashes and beeps
(faster beeps at last 5 second countdown)
Partial Arm Mode: Partial Arm Key LED turns on
DISARM Mode
Enter PIN code +
Disarm Mode: Disarm Key LED turns on
Note: The following operations are available only in DISARM Mode
Record Alarm
Message
Enter PIN code +
1. Start recording alarm message (about 10
seconds) Playback will start automatically after
the recording is complete
2. Press
to stop recording if message is
shorter than 10 seconds
Record: REC Key LED will flash
Playback: Record Key LED turns on
Alarm Type 1
(Siren and
Dialer)
Enter PIN code +
01
+
Siren will sound during alarm
(This is the default type)
Alarm Type 2
(No siren,
Dialer only)
Enter PIN code +
02
+
Siren will not sound during alarm
Test Mode
Enter PIN code +
03
+
Test Mode: Disarm Key flashes
A chime tone will sound when a device signal is
received
Hold key 7 for 3 or more seconds: Test GSM
receiving signal strength
Hold key 8 for 3 or more seconds: Turn on / off the
Wireless Siren
Hold key 9 for 3 or more seconds: Test telephone
SMS
Press Disarm key to exit Test Mode
Wireless Siren
Setting
Enter PIN code +
04
+
For HA70F outdoor solar siren
Keys 1 – 8 LEDs will display siren DIP Switch
positions.
- ON position (1) = Key LED on
- OFF position (0) = Key LED off
(Default Dip Switch position: 1111000)
Press Keys 1 – 8 to toggle new House Code DIP
Switch positions.
Press Partial Arm Key to save settings.
For SE822 indoor siren
Key 0 indicates siren is enabled or disabled
- When Enabled: Key 0 LED turns on
- When Disabled: Key 0 LED turns off
(Default: Wireless Siren Disabled)
Press Key 0 to toggle enable/disable.
Press Partial Arm Key to save settings.
RF
Anti-Jamming
Detection
Enter PIN code +
05
+
1
+
Turn On
Enter PIN code +
05
+
2
+
Turn Off (Default)
Change PIN
code
Enter old PIN code +
06
+ new
PIN code +
Default PIN code: 1234
Key Tone
Enter PIN code +
07
+
1
+
Turn On (Default)
Enter PIN code +
07
+
2
+
Turn Off
Open Door /
Window Alert
Enter PIN code +
08
+
1
+
Turn on
Enter PIN code +
08
+
2
+
Turn Off (Default)