SmartSight S1500e Series, Быстрое руководство по установке

Страница: 39 / 47

Quick Installation Guide Status LEDs
27
System LED on the S1500e and S1502e
The system status LED provides detailed information on the current
state of the system, including video.
Condition Indication -T -R
Steady red The unit is powering up.
3 3
Flashing red (1 sec.
intervals) The IP address of the unit is already assigned to
another unit in the network.
3 3
Flashing green (3 sec.
intervals) The firmware has started, but the unit is not
connected to the network.
3 3
Flashing green (1 sec.
intervals) The firmware has started, the unit is connected
to the network, but no video/audio/serial* data
is transmitted.
3
The firmware has started, the unit is connected
to the network, but no video is received or
audio/serial* data is received or transmitted.
3
Flashing green (0.2 sec.
intervals) The firmware has started, the unit is connected
to the network, and video/audio/serial* data is
transmitted.
3
The firmware has started, the unit is connected
to the network, and video is received or
audio/serial* data is received or transmitted.
3
Three consecutive red
blinks every 2 sec. No video source is detected and no video is
transmitted.
3
Flashing green-red
(1 sec. intervals) The unit is undergoing a firmware update.
3 3