Factory Reset:
1) Switch the Oyster on. As it
screen you see "Main Menu". Press the
"Settings". Press and hold the
and release both simultaneously
menu” for a split second, followed by “back”.
Menu.
2) Press the Left Arrow until you see "
button twice. The system will
3) Later software versions have the option to reset the eeprom: Press the
Left Arrow until you see "V3eeprom reset". Press the
The system will display "resetting
If your software version does not offer this option,
continue with point 4. (Get your software updated when you
This update is NOT critical
4) Press the Left Arrow button until you see "
Tick button. It should display
displayed, change it to “Oyster Vision 3”
button. Press the Tick button
the selection.
Now you are done in the Service
return the Main Menu. Now perform a location search as per below.
system is already displaying “Main menu” start at point 2.
Location search:
1) To perform a location search w
satellite (ie “going around”)
stops it and “Main Menu
2) Press the Right Arrow
button. Now press the
closest to you. Select it by pressing the T
“stored” and jump back to “Location”
you see "Automatic S
automatic search to find the satellite.
Important:
If you ever stop the system
manually, make sure to check and change the location first
Also note that if you ever get stuck or lost in a menu, press the Dish button.
This will either take you back to “Main menu” or retract the system t
over.
Oyster on. As it opens, press the Tick button. On your
enu". Press the Tick button again. Now you see
ress and hold the Left Arrow button, press the Tick button
and release both simultaneously. On your display you will see “Service
menu” for a split second, followed by “back”. You are now in the Service
rrow until you see "V3eeprom init". Press the T
will display "initialising" and then “stored”.
software versions have the option to reset the eeprom: Press the
rrow until you see "V3eeprom reset". Press the Tick button twice.
resetting" and then “stored”.
r software version does not offer this option, disregard point 3 and
et your software updated when you are home.
This update is NOT critical but certainly beneficial.)
rrow button until you see "Model selection". Press the
display "Oyster Vision 3". If “Oyster Vision 3” is not
displayed, change it to “Oyster Vision 3” by pressing the Right Arrow
ick button followed by the Left Arrow button to store
ervice Menu. Press the Dish button (very left)
Now perform a location search as per below. If you
system is already displaying “Main menu” start at point 2.
To perform a location search while the system is searching for the
satellite (ie “going around”), press the Tick button at any time. This
enu” is being displayed.
rrow button until you see "Location". Press the
the Right Arrow button until you see the location
you. Select it by pressing the Tick button, it will display
“stored” and jump back to “Location”. Now press the Left Arrow until
Search". Press the Tick button to perform an
to find the satellite.
If you ever stop the system to perform an automatic search
manually, make sure to check and change the location first as per point 2 ff
Also note that if you ever get stuck or lost in a menu, press the Dish button.
This will either take you back to “Main menu” or retract the system to start
. On your
ick button again. Now you see
button
On your display you will see “Service
ervice
Tick
software versions have the option to reset the eeprom: Press the
ick button twice.
disregard point 3 and
are home.
odel selection". Press the
. If “Oyster Vision 3” is not
by pressing the Right Arrow
rrow button to store
ish button (very left) to
If you
ing for the
time. This
ocation". Press the Tick
rrow button until you see the location
will display
rrow until
ick button to perform an
perform an automatic search
as per point 2 ff.
Also note that if you ever get stuck or lost in a menu, press the Dish button.
o start
