Page 34
display will show this information instead any other related to the
current channel and bank.
Radio
VOX:
This option lets you to enable the Voice Operated
Transmit control. If your radio has an external microphone connected to
the external microphone input, then you can enable this option.
Radio
VOX
Enable:
Select this option to enable or disable the VOX
operation. Once selected this step by pressing [OK], you will see the
actual VOX status. To toggle current status use [UP] or [DOWN] arrow
key, then save your selection by pressing [OK]
Radio
VOX
Level:
Select this option by pressing [OK] to adjust the
threshold level of voice into your microphone to switch the radio to
transmit mode. Once you enter on level alignment mode, use [UP] or
[DOWN] arrow keys to adjust it to your desired value between 0 and 15.
Radio
Min Volume:
Use this option to adjust the minimum volume
level of your radio, even when the volume knob is at minimum.
Once selected this menu step, use [UP] and [DOWN] arrow keys to select
your desired level (0..255).
Once selected the right volume, press OK to store it and go back to the
Radio Menu.
To exit, press [MENU].
Radio
R. Beep:
This option lets you to activate a beep tone to be sent
over the air to other parties each time you release the PTT (Roger Beep).
Use [up] or [DOWN] arrow keys to enable (ON) or disable (OFF) this
feature, the press [OK] to store it.
To exit, press [MENU].
