1. When the transmitter joins in ZigBee network, users can directly choose the device needed to control (for
example TV or air-conditioner) on smart mobile terminal.
2. The transmitter automatically searches the controlled device code and record the code. Users are
able to control the device through smart mobile terminal without configuring manually. For example,
TV channel and air-conditioner mode.
3.When it fails to search code automatically, additional manual configuration is needed. Specific steps
are followed.
①
When it joins in ZigBee network, enter the setting interface on smart mobile terminal. Press the
button needed to configure on the setting interface. Then, the red LED light flashes.
②
Press the button needed to configure on the remote controller pointing to the IR detection zone.
When configuration finishes, red LED light flashes quicker and then goes out.
③
Repeat the above steps to finish all buttons needed to configure.
Usage
4. It is available to control the home devices on smart mobile terminal. For more information about
software, please refer to Software Download Guide.
10
