7
Office TBF™ Connection
6
UTBF
UTBF
~
~
REAR VIEW
OF400TBF-OF600TBF
1.Turn off and un-plug all devices.
2.Plug UPS unit into grounded wall outlet.
3.Place the UTBF where monitoring lights can be observed.
UTBF INDICATORS
:
Green light only
- It confirms properly connected equipment is fully protected.
Green and Red light
- Reverse polarity or loss of ground at the wall outlet.
Call your electrician to correct the problem.
Green light off
- Power failure or UTBF fault. Contact customer service.
T10A 125VAC
USB Connection with Network Protection
(OF-USB models only)
connect the USB cable as shown in the diagram below. To protect the
Network connection, plug incoming Network line into the "in" socket at
the rear panel of the Office-USB Series UPS. Use provided CAT5 Network
cable and plug one end to the "Out" socket at the rear panel of the UPS.
Plug the other end of the Network socket of the PC as shown below.
To allow for unattended system shutdown for your operating system,
5
Incoming
Network Line
IN OUT
PC
REAR VIEW
OF400USB-OF600USB
USB
USB
T10A 125VAC
