11
Note:
Ensure the battery is fully charged during line mode when conducting functional tests.
Note:
A list of events shown as below is not able to disable alarm buzzer:
Low Battery, Fan Failed, Fan Fault Time Out, and Overheat.
Note
: User can disable the alarm buzzer when it’s sounding, but an alarm will still sound when a new alarm event is
encountered.
LCD display functions:
The following table describes the functions of the LCD display.
Table3. Description of LCD display function
No.
Description
Function
Input frequency
and
voltage
Indicates the value of input frequency
and
voltage
Input plug indicator
Light on when the input power is at no loss.
Output frequency
and
voltage Indicates the value of output frequency
and
voltage
Output plug indicator
The UPS has three groups of outlets. The output plug indicator will light on if there is
output power respectively. LS3 is the main outlet and cannot be configured.
UPS status/user setting
display String
Strings Indicate the UPS status (see Table 4)
Strings Indicate user setting options (see Table 5)
Warning indication
Light on when the UPS is failure or alarm.
Settings
Light on when the UPS under settings mode.
Battery
volume
level display
Indicates the amount of battery volume remaining. Each battery volume level bar
indicates a 20% of total battery volume
Load
capacity
level display
Indicates the percentage of UPS load capacity which is being used by the protected
equipment. Each LCD level bar indicates a 20% of the total UPS output capacity.
