background image

How Well Does Solar Heating Work?

A properly sized and installed system will raise
pool temperatures 10-15

0

during the season.

When it’s cloudy or rainy, solar won’t work as
well (and you probably won’t be swimming
during those times), but your water will be back
up to temperature after one or two warm days.

Do I Need A Special Pump?

If your pool pump is in good working condition,
there shouldn’t be any problem using your
existing pump. A one HP pump will handle
installations up to 30 feet away from the pool
equipment and one story up. If the collectors
are cool to the touch when the water is running
through them on a warm day, you are getting
enough flow.

How Many Collectors Should I Use?

Follow the sizing chart shown on box for best
results. If the sizing chart calls for more collectors
than you have purchased, the results will not be as
effective. For areas where the swimming season
can be year round, add an additional collector to
heat during the cooler months.

Where Can I Put The Solar Collectors?

Anywhere you get full sun for at least six hours
during the day. The longer the collectors are in
full sun, the better they work. If you are mounting
on an angle (like a roof or rack), the collectors
should face in a southerly direction if possible.

What Additional Parts Will I Need
To Complete My Installation?

You will need the correct amount of pipe or hose
to connect the collectors to your pool equipment.
For rooftop installations, we suggest you use rigid
schedule 40 PVC pipe. You’ll need PVC primer,
glue and fittings. Glue and fittings are available
where you buy your pipe.
To mount on an angle (roof or rack) use kit #60633.

What About A Solar Blanket?

A solar blanket will hold the heat in the water at
night, especially early and late in the season. It
is best to remove the blanket on warm sunny
days so the solar energy can penetrate deep
down into the water rather than be blocked by
the opaque blanket material. Remember, your
Sunheater will heat the water and a blanket will
hold it in, but not heat it effectively.

ORIENTATION

BASIC SYSTEM LAYOUT

2

Содержание Sunheater









Отзывы: