9
Press the yellow RESET button to turn off the siren. This will reset the
unit to the ON state automatically. If the water motion sensor is
triggered, turn off the unit by pressing both the green ON and the
yellow RESET buttons simultaneously until the water settles down.
NOTE: If the water motion sensor is triggered, alarm will not stop until 3
seconds after pressing both the green ON and the yellow RESET buttons
simultaneously.
After the unit is turned OFF, the unit can be reset in two different modes.
INSTANT RESET
This allows the unit to respond to the water motion within 5 seconds
after the following procedures.
1) Press the green button
2) Then press the yellow button
DELAY RESET
This allows the unit to have 3 minutes delay after pressing the green
button. During this 3 minutes, the alarm will not sound even if the
water is not settled and the sensor keeps triggering. The unit will reset
automatically after 3 minutes.
NOTE: The RF function is active during this 3 minute delay.
RESET THE UNIT AFTER ALARM SOUNDS
1
2