ADD DEVICE
1. Make sure Bluetooth is turned on in your
phone’s settings.
2. Unscrew the top of the light. Remove the
pull-tab,find the power button and turn the
light on and off 5-6 times and then leave it
on.
(If light does not turn on it may need to
be charged. Place in sunlight to charge.
Light takes about 6-8 hours of sunlight to
fully charge)
3. Then on the home screen of the app, press
the (+) in the top right corner or “Add Device”
in the middle.
4. Once you are on the page with all the
devices to add, wait a few seconds and a
window to add the device will pop up..
When device window pops up with the light
to add, press “Go to add”
NOTE
(During set up process, cover the light sensor or
turn light upside down so light thinks it is dark)
