Page
5
of
8
100% display brightness
75% display brightness
50% display brightness
SETTING THE DISPLAY MODE
The smartlux DIGITAL is equipped with a range of display modes so that you
can achieve the best possible image. If you press the contrast button (4)
briefly and repeatedly, you will run through the various display modes from
true colour mode through increased contrast mode black/white and
white/black up to false colour display black/yellow and yellow/black.
SWITCHING THE LED ILLUMINATION ON/OFF
There are two LEDS (9) on the underside of the smartlux DIGITAL which
illuminate the subject material to enable optimum contrasting and true-
colour images. Under certain circumstances (e.g. glossy subject material) it
may be necessary to switch the LED illumination off to avoid reflections.
To do this, press and hold the contrast button (4) for 3 seconds.
If you want to switch the LED illumination on again, press and hold the
contrast button for a further 3 seconds. The LED illumination status
currently set will be displayed at the top screen border for 5 seconds.
Lightbulb indicates LED illumination switched on
Lightbulb crossed out indicates LED illumination switched off
FREEZING AND SAVING IMAGES
The smartlux DIGITAL is equipped with a photo button (2) which enables
you to temporarily free images and then save them permanently on the
device (photo mode).
