6
(8) To use USB cable and connects with tablet or USB devices to the USB ports (Front Panel).
<Front Panel>
Charging & Syncing:
Please follow below ways for charging or syncing USB devices.
(1) Follows the step of connection with host computer, and connects host computer with the unit.
To secure check, the whole LEDs won’t be illuminated till the charging hub powered on in 5~6 seconds.
Set the hub working at Charge mode (non-connecting to PC) and the Green Energy button is turned on; the hub will
shutdown in 60 seconds if the hub idles without charging devices connected at the first power on.
(2) Connect your USB devices to the USB ports on the hub.
Sync mode –
A. As soon as the Charging hub connects to a computer, turn the power on; the charging hub may charge and sync at a
time either at single unit or cascade connecting. In this situation, the hub is designed to keep operating when all
devices are fully charged.
B. Press for 3 seconds; you may alternatively switch function to Charge or Sync mode.
a. Sync function: the port LEDs illuminate orange; and the hub works at Sync mode.
b.
Charge function: the port LEDs illuminate green means the devices are fully charged or disconnected; the port LEDs
illuminate red means the devices are charged in progress. When the devices are fully charged it will switch function
to Sync mode automatically.
Note: If you switch function to Charge mode for the 1
st
hub, the 2
nd
hub will switch to Charge mode and work on same function.
When the devices are fully charged, the both 2 hubs will switch function to Sync mode individually.
Charge mode –
When the hub disconnects to the computer it is working at Charge mode; and it may charge devices by high power
either at single unit or cascade connecting.
(3) The Green Energy function
The Green Energy function (push button at the rear panel) may cut off the power after all the charging is finished when the
hub is working at Charge mode (non-connecting to PC). It is not working while the hub is at Sync mode or charge function of
Sync mode. (Default setting of Green energy button is on)
Green energy ON: Button’s green LED illuminating.
a. The hub will shutdown in 60 seconds if the hub idles without charging devices connected at the first power on. And
the button’s green LED lights off.
b. When all devices are fully charged, the hub will shutdown in 10 seconds automatically. And the button’s green LED
lights off.
Green energy OFF: Button’s green LED lights off. When all devices are fully charged, the hub still keeps operating; and
the port LEDs keep green illuminating. Once it senses the device’s battery consumed, the hub starts recharging.
(4) Re-start the hub on cascade connections
Manually turns the power switch On for the 1
st
hub, the both 2 hubs will switch to Charge mode and work on same
function.
Once the 1
st
hub is connected to the computer again, the both 2 hubs will re-start and switch to Sync mode, and work on
same function.
(5) The Smart Link function
It is a must that both the 3.5mm M/M Link Cable and the USB cable are connected between the 2 hubs. And the power
switch of the 2
nd
hub must be turned at ‘ON’. The 1
st
hub can manage the 2
nd
hub to work on same function simultaneously
thru the Smart Link function.
To power on/off the both 2 hubs
To switch function to Sync/Charge mode
Using the appropriate USB cable
iPad, tablet or USB devices
