SmartLabs SML-272 SD, Руководство пользователя, Страница: 15 / 26

Connecting External IR Receiver for Remote Control
If your device is supplied with the RF Remote Control, you do not need an exter-
nal IR receiver.
If your device has a slot to plug in an external IR receiver, you can connect it
to IPTV STB and use this receiver in the direct visibility range instead of using
internal IR receiver of the device.
Both external and internal receivers accept signals from the same Remote
Control. When an external receiver is connected, it accepts signals from Remote
Control. In order to send commands to the internal receiver aiming the Remote
Control to the window on the front panel of the device, disconnect the external
receiver from IPTV STB.
External IR receiver is not included with the accessories. You can purchase it
separately.
Insert the external IR receiver into the slot located at the back panel of the de-
vice (see the back panel picture).
Place the signal receiving eye of the receiver in the direct visibility range from
the device (see Device Installation ).
15