Installation guide
Step 1
First choose which bike computer you want
to use. GAM for smartLAB, Garmin and many
others. BRT look for Bryton,
Step 2
Screw the handlebar bracket to the moun-
ting kit with the 2 large screws. Do not fully
tighten the screws. That only happens on
the bike.
Step 3
Take 2 small screws and screw the fastening
piece so that the designation (GAM) is
vertical.
Step 7
Choose the right rubber pad depending on
your handlebar diameter.
Attach the handlebar bracket to the rubber
pad and tighten the large screw.
Step 5
Bring the handlebar bracket into the desi-
red position and tighten the 2 screws.
Step 4
Place the cycle computer sideways in the
holder and turn it 90 °.
The bicycle handlebar bracket and computer
is fully assembled.
Step 8
Step 6
Installation of the additional bracket for other devices such as camera or light
Step 2
Step 1
Step 3
Screw the suspension to the lower part of
the handlebar bracket with 2 small screws.
Slide the light bracket (included) or camera
bracket into the suspension.
Push the large screw with the handle into
the round guides and screw it tight after
you have mounted the handlebar bracket
on the bike.
ENGLISH
ENGLISH