SmartKat Sailing boat, Руководство по сборке

Страница: 4 / 23

SMARTKAT – STANDARTEQUIPMENT:
2 inflatable hulls 1 mast 1 main sail
1 trampoline 1 tiller 1 jib *)
1 rudder 1 main beam 1 repair set for the hulls
1 centerboard 1 bowsprit 2 carrying bags
All necessary ropes and clamps for using the boat
*) jib respectively in performance version
GENERAL RECOMMENDATIONS
Before you begin to inflate the hulls, lay out your smartkat onto an area that is clean and
free of sharp objects and debris.
1. Inflate your smartkat using a general purpose air pump of the type you would use for inflating
air beds, swimming toys or small inflatable boats. Naturally you can also use an electric air pump.
How-ever, this must be adjusted so that it switches off automatically when the pressure reaches
0.3 bar. Because pumps of this type cannot usually achieve 0.3 bar, use a hand or foot pump to
raise the pressure until 0.3 bar is actually achieved in the hulls. Check this using the manometer
supplied.
DO NOT USE A COMPRESSOR OR OTHER TYPE OF HIGH PRESSURE PUMP UNDER ANY
CIRCUMSTANCES. IF YOU DO, YOU CAN DAMAGE THE HULLS.
Your smartkat is designed for an operating pressure of 0.3 bar.
If they are exposed to sunlight for any length of time, please check the pressure and
release air pressure as necessary.