Smartinterface Lunette, Инструкция по эксплуатации

Страница: 17 / 18

17
Rev. 2.0.1 www.smartinterface.de · info@smartinterface.de
Index of Contents
1.0 Place clock on workbench (90° to workbench) 2
2.0 Place wrench onto lunette. (cogs must grip, level) 2
2.1 Turn wrench to the left (lunette fits very tight) 3
2.2 Unscrew lunette by hand. 3
2.3 Place lunette aside 4
3.0 Use pin to lift the glass on the side containing the small notch. 4
3.1 Place glass aside 5
4.0 Lift synthetic ring with the pin. 5
4.1 Place synthetic ring aside. 6
5.0 Lift O-ring with the pin. 6
5.1 Remove and discard the O-ring (NOT intended for re-use). 7
6.0 Carefully extract clock element (ease element out by holding on at the top and the bottom!) 7
6.1 Remove clock element (watch out for the wire) und place it upside down into the casing. 8
7.0 Lift battery clamp (star) by the protruding point. 8
7.1 Place battery clamp (star) aside. 9
8.0 Remove battery (carefully extracting it with the pin) and properly dispose of the battery. 9
8.1 Do not throw battery into trash; use public collection facilities for hazardous materials. 10
8.2 Insert new battery. 10
9.0 Place battery clamp back on unit (hooking in the left side first). 11
9.1 Place battery clamp back on unit (pushing right side down with pin). 11
10.0 Turn clock element back around (watch out for the wire) and insert. 12
10.1 Press clock element into casing (don’t push on the display – only on the edge). 12
10.2 Press clock element into casing (don’t push on the display – only on the edge). 13
11.0 Insert new O-ring exactly into the surrounding groove. (The O-ring must be free of grease!) 13
12.0 Place synthetic ring back on unit (check the fit of the O-ring). 14
13.0 Put glass back on unit (with the larger surface facing downward).
Clean glass prior to this to avoid fingerprints on the glass. 14
14.0 Place lunette back on unit (check for level fit). 15
14.1 Wind lunette forward by hand (check for level fit). 15
14.2 Place wrench onto lunette (Mesh must grip, be level). 16
14.3 Tightly fasten lunette with lunette wrench. 16