— Operating the SR-525
Chapter 3
Operating the SR-525
This chapter tells you how to set up the SR
-525, automatically
configure devices, and use advanced features such as macros.
Before using the Learning Function
Before you start configuring your remote controls using the
learning function, please note the following:
•
You may map multiple devices to the same device layer.
This can be very useful, for example, if you wish to control
the TV’s volume using your amplifier without having to
change between the two device screens. In this case, you
learn the regular TV functions from the TV remote and the
volume functions from the amplifier remote. In rare cases
this might fail, although no corruption of data or other
damage will occur. If this happens, delete the learned
code for the device layer and learn only one remote to the
device screen.
•
To reconfigure a device layer for a different device, first
DELETE all the commands for the device. Refer to the
chapter ”
Using the delete function”
.
•
When using the learning function, you must press each
button within 120 seconds. Otherwise, the SR
-525 will
exit learning mode and return to normal operation mode.
SMARTHOME™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #8180N
