Smarthome SELECT VAI-2007E201 страница 7 Скачать руководство пользователя

Страница: 7 / 12

Notes on Bluetooth operations

1) Working mode/sleep mode:

There are 3 minutes of working time for the Bluetooth pairing connection from the time when the wireless receiver is

powered on and enters into a working mode.

If there is no pairing connection made within 3 minutes, the wireless receiver will enter into a sleep mode and the

pair

option will no longer be available until the Bluetooth receiver has been reset via a power off and power on (unplug and

then plug in again).

The Bluetooth receiver will wake up manually by any one of the previously 8 paired

devices for a connection even if the

wireless receiver is in sleep mode.

2) Automatic connection:

The wireless receiver will be in search mode within a few seconds of being powered on to sense and connect

automatically to the previously

last paired device.

3) Memory function:

The Bluetooth receiver is capable of storing up to 8 pairings; any new pairings over 8 will delete the previous pairing in

order from first paired to last paired.

The Bluetooth connection between the wireless receiver and the Bluetooth device might be disconnected when it is

out of the 10 meter (~30 feet) reception range. The wireless receiver is able to automatically connect to the Bluetooth

device once they are within the reception range (within in 30seconds).

Содержание SELECT VAI-2007E201












