____________________________________________________________________________________________
DIGITAL VIDEO RECORDER
31
5.
Motion Detected Recording (MOTION RECORD)
1)
Select the motion Area for your desired camera on the Motion Area Set on
the RECORD SET
2)
Select the motion sensitivity level on the MOTION RECORD on the
RECORD SET menu. (Level 1: less sensitivity, Level 15: more sensitivity)
3)
Select the motion duration: 20 –40(default)-60-80-100-120-180-240
Note: Recording continues as long as motion is detected. It counts from latest motion
if there is another motion during motion record.
4)
The unit starts recording when there is motion detected as set on the
‘RECORD GROUP SET’ menu.
<Refer -4-4) >
Motion detected recording mode
Note:
There may be cases when the recorder’s built-in motion detection function
does no operate properly due to the condition of the input video signal or
other factors.
6. PLAYBACK
1) Basic Playback
a) Press the PLAY button while recording or in stop mode.
The oldest recording on the hard disk is played back when you press the
PLAY button for the first time after the power is turned on for the first time
you stop recording.
After the first time, subsequent pressing of the PLAY button will resume
playback from the point where it was stopped.
b) To switch the camera, press the desired camera number while playback.
c) When the end of HDD is reached while playback, playback continues from
the beginning of HDD.
d) Press the STOP button to stop playback. If the unit is recording while
playback, pressing the STOP button once stops only playback. Pressing the
STOP button twice stops recording.
