HMC9000 Diesel Engine Controller User Manual
HMC9000 Diesel Engine Controller 2015-12-25 Version 1.3 Page 9 of 52
5 OPERATOR INTERFACE
5.1 PUSHBUTTONS DESCRIPTION
Stop
Stop running generator in local mode; During stopping process,
press this button again to stop generator immediately.
Start
Start genset in local mode.
Remote Mode
Places controller into its remote mode. In remote mode, engine
operation can be controlled via remote control module. In local mode,
except for stop button, all the other panel buttons will be locked.
Local Mode
Places controller into its local mode. In local mode, controller can be
started using panel button while remote control will have no effect.
Reset
If alarm occurs, pressing this button will reset it. All alarm only can
be removed after reset.
Lamp Test
Press this button will test panel LED indicators and display screen.
Mute
Alarm sound off;
Up/Increase
Screen scroll.
Up cursor and increase value in setting menu.
Down/Decrease
Screen scroll.
Down cursor and increase value in setting menu.
Left
Screen scroll.
Left move cursor in setting menu.
Right
Screen scroll.
Right move cursor in setting menu.
Set/Confirm
1. Pressing and holding for more than 3 seconds enters parameter
configuration menu;
2. In settings menu confirms the set value
Exit
1. Returns to the main screen.
2. In settings menu returns to the previous screen.
WARNING:
Factory default password is 01234. Operator can change the password to prevent others
from free altering of the settings. Please clearly remember the password after changing. In case of
password loss, please contact Smartgen service department enclosing all the information from the
“
ABOUT
” page of the controller.
