Smartgen HAT600P Series, Руководство пользователя

Страница: 48 / 58

HAT600P Series ATS Controller User Manual Page 48 of 58
Fig. 14 Cross Connection Between Controller and PC
NOTE : Generally direct wiring is enough to connect controller and PC.
18
TERMINAL DESCRIPTION
18.1
CONTROLLER TERMINAL DESCRIPTION
Fig. 15 Controller Back Panel
Table 23 Port Function Description
Pin Items Description Notes
1
S1 close output Volt-free relay N/O output 250VAC 16A (capacity)
2
3
S2 close output Volt-free relay N/O output 250VAC16A (capacity)
4
5
Aux. output 1
N/C
Default: ATS power
of L1 output. Volt-free relay contact output:
capacity 250VAC16A
6 Common
7 N/O
8
Aux. output 2
N/C
Default: ATS power
of N output. Volt-free relay contact output:
capacity 250VAC16A
9 Common
10 N/O
11 A1
S1 AC 3-phase 4 wire voltage input
For single phase, only connect
A1, N1
12 B1