BACMXX06 Series Battery Charger
BACMXX06 Series Battery Charger Version 1.0 2014-12-20 Page 6 of 18
2 PERFORMANCE AND CHARACTERISTICS
1) Switch power supply structure, wide input AC voltage range, small size, light weight, high
efficiency rate;
2) Users can select automatic two-stage charging process or automatic three-stage charging
process as needed. Both the two charging process are carried out according to storage battery
charging characteristics to prevent overcharging and significantly prolong battery lifetime;
3) Built-in PFC circuit can calibrate the power factor above 0.99;
4) Built-in current protective circuit for over current protection, short-circuit protection and reverse
connection protection. The output will be recovery automatically after the failure is removed.
5) Battery voltage detection ports can detect the battery voltage in real time.
6) Battery low voltage output port; It will output low level immediately after the battery voltage has
fallen below the set value for preset delay.
7) Temperature sensor port allows for monitoring the battery temperature in real time and
temperature compensation function which can prevent the battery temperature is too high
effectively.
8) Mains failure port; It will output low level immediately when the AC input is interrupted.
9) Standard RS485 communication port.
10) BACM2406 charger is suitable for 24V battery
；
rated current
：
6A
；
BACM1206 charger is suitable for 12V battery
；
rated current
：
6A.
11) LED display: Full charged indication (Green light) and charging indication (Red light).
