(Client -> CMS Group). This has to be one (1) word without any spaces. The
unit that was shipped with the CMS controller has to have a group setting as
well. All clients you have received are assigned to the group "smartclients"
already by default. This can be changed at will. You can set different groups
for any group of SmartClients.
On the unit or the virtual machine image with the integrated CMS controller
is a new menu entry "CMS". Click this to enter the CMS controller.
In the CMS controller "Networks" tab you need to define the range of IP
addresses that includes all clients. The default entry can be overwritten with
new values. The controller will later scan for all existing clients in the
network within this range.
In "Session Pool" you can now define new sessions and test them.
In "Home" you should see all groups showing up (may take a bit depending
on how busy your network is while the controller scans the network). Only
clients that are connected to the network and are turned on will be showing
up!
Click on a group and and you will see all members of the group.
Each member can be administered individually if you click on its IP address.
All sessions that are defined in the session pool can now be assigned to the
available groups. Once you click "save", all clients belonging to this group
will slowly be synchronized. Clients that were turned off but belong to a
group will be synchronized automatically once they turned on, but only if the
SmartClient with the CMS controller is turned on and available within the
network.
Copyright © SmartFLeX Technology, Inc., SmartClient Manual, Rev. 02/22/16
Page: 16 of 19
