background image

10

 

 

©2012 Smarter Tools, Inc. All Rights Reserved 

Owner’s Manual 

General Safety Precautions (cont’d) 

_________________________________________________________________________________________________ 

 
Chemicals 

 

 

Avoid contact with hot fuel, oil, exhaust fumes, and hot solid surfaces. 

 

 

Avoid body contact with fuels, oils, and lubricants used in the generator. If swallowed, seek medical treatment 

immediately. Do not induce vomiting if fuel is swallowed. For skin contact, immediately wash with soap and water. 
For eye contact, immediately flush eyes with clean water and seek medical attention. 

 

Noise 

Prolonged exposure to noise levels above 85dBA is hazardous to hearing. 
Always wear ANSI approved ear protection when operating or working around the Generator when it is running. 

 

Extension Cords 

If an extension cord (not included) is used, make sure to use only UL approved cords having the correct gauge and length 
according to the following table: 
 

Nameplate Amps  

 

 

 

 

Cord Lengths 

    (@full load)                                                                                    

    

    0’-50’                        50’-100’                   100’-150’                   150’-200’                              

0-5 

16 

16 

12 

12 

5.1-8 

16 

14 

10 

8.1-12 

14 

12 

12.1-15 

12 

10 

15-20 

10 

10 

 
 
 
 

 

Содержание ST-GP3500


























Отзывы: