Where the smart things are
®
sm
2013 Compacta International, Ltd. - Rev.
5/2013
ZBRE
and Smartenit are trademarks of Compacta International, Ltd.
ZigBee is a registered trademark of the ZigBee Alliance
Program Button Additional Operation
Desired Operation
Action on Pushbutton
Device Behavior
Leave Network
Press and hold for 15
seconds
Status LED will
begin Fast Flashing
Close Join
Press and hold for 3
seconds when device is
in Open Join
Status LED will stop
flashing
Request New Firm
-
ware via OTA
Tap 6 times
LED will quick blip
off, once every
second while
OTA update is in
progress
Soft Reset
Tap 10 times
LED will go out for
about a second and
then device will
rejoin network
Status LED Indication
Pattern
Indication
Fastest flashing
Joining/Rejoining network
Flash once per second
Permit-Join mode
Solid
Joined to network
Two blips per second
Device cannot find “Parent
Device” and/or network it
was joined to
Open Permit Join
In addition to extending the range of ZigBee HA devices, the ZBRE also serves as a router and allows
other ZigBee HA devices to join the network. After the ZBRE has already joined the network (LED is
solid
green
), proceed as follows:
1.
Press and hold the Program Button for 6 seconds. The Status LED will begin to flash rapidly.
The ZBRE will allow joining of other devices for up to 4 minutes.
2. Join the new ZigBee HA device to the network according to the join method of that device.
3. When the ZBRE has timed out for join permission, the Status LED will return to solid green.
(949) 429-3303
Technical Support
Smartenit.com
