Smartech WBC-250 Скачать руководство пользователя страница 4

USER’S MANUAL PAGE 4

WBC-250

10. Any repair must be carried out by the manufacturer or an authorized 

repair agent in order to avoid danger.

GROUNDING AND AC POWER CORD CONNECTIONS

This battery charger is for use on a nominal 120 volt circuit. The plug must 
be plugged into an outlet that is properly installed and grounded in 
accordance with all local codes and ordinances. The plug pins must fit 
the receptacle (outlet). Do not use with an ungrounded system. Use of an 
adapter plug is not recommended; an adaptor plug should not be used.

USING AN EXTENSION CORD

The use of an extension cord is not recommended. If you must use an 

extension cord, follow these guidelines:
1.  Pins sockets on the extension cord plug must be the same number, 

size, and shape as those of plug on charger.

2.  Ensure that the extension cord is properly wired and in good electrical 

condition.

3.  Wire size must be large enough for the AC ampere rating of the charger, 

as specified on the next page:

WARNING: This Product contains chemicals including SCCP, PAHs, 
DBP, DEHP, BBP, DBP, DIBP which are known to the State of 
California to cause cancer, birth defects or other reproductive harm.
For more information, go to - www.P65Warning.ca.gov
Wash hands after handling.

Содержание WBC-250























Отзывы: