1-6
1.4 Physical
Description
1.
Power Input
If your power input is DC12V.
2.
Ethernet Port
The IP device connects to the Ethernet via a standard RJ45
connector. Supporting NWAY, this IP device can auto detect the
speed of local network segment (10Base-T/100Base-TX
Ethernet).
3.
Reset Button
Step 1:
Switch off IP device by disconnecting the power cable
Step 2:
Press and continue to hold the Reset Button. Reconnect the
power cable while continuing to hold the reset button.
Step 3:
Keep holding the reset button depressed around 6 seconds,
release the reset button. The unit will start up with factory default
settings.
4.
Audio Input
The IP device supports audio input with earphone jack
5.
Audio Output
The IP device supports audio output with earphone jack
6.
The I/O Terminal Connector
Used in applications for e.g. motion detection, event triggering,
time lapse recording, alarm notifications, etc., the I/O terminal
connector provides the interface to:
