SAVE.
l
If the worst should happen (you SAVE settings that you dislike), you can
always recover older user settings, one of two settings profiles previously
configured, or, in the worst case scenario, restore the original factory settings.
These options are found in MORE.. / SAVE/RESTORE page.
Exiting the menu
As noted previously, there are two ways to exit the OSD menu:
l
CANCEL is available on the bottom menu bar of most menu pages. Cancel will
exit the menu, and will return all settings to the last saved state.
l
Holding the Enter button for three seconds at any time will exit the OSD menu.
Current settings will be preserved for testing.
However, any changes made between the last save and exiting the OSD will be lost
when
camera power is lost.
*NOTE: the original factory settings can be restored at any time by going to the
SAVE/RESTORE selection from the main OSD menu page.
MENU ITEMS
Sliders
Some OSD options include slider bars to select a value from a range.
For example: MORE / SETUP.. / IRIS.. / DC GAIN allows you to choose a value
from 0 to 255.
To operate the slider, highlight the selection with the Up and Down buttons, then
use the Left and Right buttons to move the pointer to the desired value.
Pressing the Down button will move to the next available slider.
Wheel
CAMERA ID in CAMERA ID SETUP is a Wheel menu item. After selecting the
option, a single character of the camera ID text is highlighted. Using the left or
right arrows will scroll through the character set (alphabet in upper and lower case,
numbers, symbols, and additional roman character support for European
> DC
GAIN
▲
0 91 255
