16
SMARTEK Vision | User Manual
– LED Strobe Controller Family | Doc. v2.2.1
3. IPSC-Series
3.1. IPSC1
Figure 10: IPSC1
– Front panel view
Specification
IPSC1
Output channels
1
Operating Modes
Continuous, External Trigger, Internal Trigger,
Software Trigger, External Switch
Max. Voltage
200V (pulsed)
55V (continuous)
Max. current pulse
(depending on pulse width)
20A @ 200V
Max. continuous current
2A @ 30V
Pulse output range
1µs
– 1000ms in 1µs steps
Maximum frequency
(External Trigger)
4,9kHz
Maximum frequency
(Internal Trigger Generator,
External Switch Mode)
997Hz
Trigger input
0
– 5V or 0 – 24V level,
positive or negative edge (not opto-isolated)
Control interface
Ethernet (10BaseT)
Power requirements
12V
– 24V DC (min 11V, max 26V)
Power consumption
Max 3A @ 24V (72W)
Max 3,5A @ 24V (84W)
with additional heat sink
Housing
Black aluminum case
External dimensions
(H / W / L)
39 x 88 x 103 mm
Weight
approx. 285g
Storage temperature (ambient)
from -30°C/-22°F up to +80°C/+176°F
Operating temperature (ambient)
from -5°C/+23°F up to +50°C/+122°F
Conformity
CE, RoHS2
Table 11: IPSC1 - Specification