SmartCam A12VT, Быстрый старт

Страница: 7 / 48

1
ABOUT THE PRODUCT
Quick Guide
The camera can be accessed and
controlled via the following ways:
 Client software iSmartCMS: tracking setting,
camera search and control, network setting.

VLC: watch the camera four streams;

IE: camera image preview, camera control,
network setting;

SDK: provide secondary development kits
for the connecting and controlling of
camera;

Onvif: version 2.1 supported
Name: admin
Initial password: 123456

Network pass-through: recommended
connection mode with recording or
streaming device.
CMS
Refer to detailed instructions in page 14 of this
user manual.
Rtsp
1
Make sure PC and the camera are in the
same LAN.
2 Three channel stream url: rtsp://IP/chx, x=1,
2, 3. 1 & 3 stream tracking camera image, 2
stream full view camera image.
3 IP address is acquirable through
CMS, default rtsp port is 554.
IE
1 Make sure PC and the camera are in the same
LAN.
2 Input IP port number 88 (port
numbers fixed to 88) in the IE address bar:
http://IP:88, such as
http://192.168.18.229:88
3 Install plug-in;
4 Name: admin Initial password: Null;
5 Support Windows 7 or above operation
system, whereas Windows XP is not
supported.
SDK
Disk comes with camera includes:
SDK_Demo: SDK development sequence;
SDK_Doc: instruction of SDK connection;
SDK_Lib: SDK Library. SDK only provides
image acquiring, PTZ controlling and etc,
tracking configuration is not included.
Network Pass-Through
On the tracking parameters setting page,
the IP address, port and connection protocol
(TCP/UDP) of the recording or streaming