Page 13 of 66
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airClient™ Nexus User Guide
The page information descriptions are provided in the table below:
Table 2-1 Description of Parameters
2.2. Web
GUI
Administrator Password Change
By default the administrator password is
smartBridges
(case sensitive).
Follow the steps below to change the Administrator password.
1. Click on the
Tools
|
User Manager
drop down menu in the navigation menu bar. An
Administrator Password Change
GUI will appear.
2. Enter the fields for
Old Password
, new
Authentication Password
and
Confirm new
Authentication Password
.
3. Click on the
Apply Changes
button to change the password.
Figure 2-4 Administrator Password Change
Page Item
Descriptions
IP Address
Editable Ethernet IP Address.
IP Mask
Editable Ethernet IP subnet Mask
Gateway
Editable Gateway IP address.
Ethernet
Configuration
DHCP
Editable DHCP status Disabled / Enabled
User can enable DHCP by ticking the check box to obtain
an IP address from the network DHCP server
SSID Device
SSID.
Channel
Device operation channel.
RSSI
RSSI value when associated
Wireless
Configuration
Maximum Wireless
Throughput
Maximum Wireless Throughput in kbps
ETH A MAC Address
Ethernet A (wired side) MAC address.
Display only
ETH B MAC Address
Ethernet B (wired side) MAC address.
Display only
Port
Information
Radio MAC Address Radio MAC address.
Display only
Operational
Mode
Device operational
mode
Current device operational mode, either as airClient
Bridge or airClient Router or airClient NAT mode.
