SmartAVI SuperMatrix, Руководство пользователя

Страница: 6 / 27

Connecting the SuperMatrix (Quick Start)
Warning: As a precaution, we recommend that you disconnect all power cords and make sure that
all devices are turned off.
1. Connecting the video
connect all the video input at the SuperMatrix to all the sources. The SuperMatrix
used HD15 Male cable to support XVGA, Svideo, Components video and
Composite Video ( SmartAVI offers special Adaptors for most of the video type of
signals)
1. Connecting the Audio
connect all the audio input at the SuperMatrix to all the sources. The SuperMatrix
used .5mm JACK le cable to support analog audio ( SmartAVI offers special Adaptors
or most of audio video type of signals)
2. Connect all remotes unit receivers via Cat5 cable
3. Connect a serial cable from the RS-232 port on your computer to the RS-232 port located
on the back panel of the SuperMatrix unit.
4. Plug power cable into the SuperMatrix unit.
5. Install SmartControlPro software.
6. Power on the SuperMatrix.
Chapter 2: Installation