10
Function
Description
Protocol
Password
Sets the passwords for users and Admin
\\FnnWuu<CR>
Name
Sets the name for computers and Admin
\\FnnNuu<CR>
Permissions
Review and Set permissions
\\FnnP{ccuup}
<CR>
Restore Factory Settings Restore factory settings. Do not restore default Admin’s
name/password.
\\FnnF<CR>
Help
Display help screen
\\Fnn?<CR>
\\FnnHELP<CR>
Exit
Exit from CLI mode to CM
\\FnnEXIT<CR>
RS-232 INTEGRATION WITH THIRD PARTY SOFTWARE (Continued)
Debug Mode
Enter command \\FnnD<CR> from Command mode.
The username and password are case sensitive.
Default USERNAME: Admin
Default Password: Pass
Commands for Debug mode only:
Permissions as follows:
C - Control - user can control and view this PC.
V - View - user can view only, can not control this PC.
D - Disabled - access to this PC is disabled for this user.
To review all permissions use as follow:
\\FnnP<CR>
p = permission C, V or D
Help command
For the Help command, a list of commands will display in the terminal. Following the syntax in this menu
will allow you to navigate through the Debug Mode.
Default factory settings
1. Permissions: All Users have C, V, and B permissions
2. Default Frame address is 00 (\\F00)
3. Default admin's name and password: Admin, Pass
4. Default user’s (RX’s) password is 123, same for all.
5. Default names for Computers (TXes) Computer 01, Computer 02’ ...
6. Default matrix interconnection is 1-1, 2-2, ... , 8-8.
