SmartAV Smart Console E72, Руководство по установке

Страница: 9 / 15

9
E72 Smart Console™ Installation Guide
Mar 2007 9
Powering Up
The correct order for powering up the parts of your
Smart Console™
for the first
time is as follows:
First, switch on the rack PC using the switch indicated by Pointer A in Plate 2. Then
power on the console via the switch indicated in Plate 3 by Pointer B. On the right-
hand end of the
Arc™
press the silver start button. Each module correctly installed
in the console should shortly begin to flash the Light Emitting Diode (or LED) in the
upper left corner. The
Arc™
should also flash the top-left-most LED (not including
meters) in both segments. If any modules do not flash their top-left-most LED then
re-seat them in the chassis of the console.
Next, the rack PC will automatically boot. Assuming all connections have been made
correctly then the control surface will go into its default state where all the top-left-
most LEDs will cease flashing. The screen on the Upper
Active Panel
should also
illuminate.
Congratulations! You are now ready to configure your mix engine to operate with
the
Smart Console™
. Please refer to the Engine Configuration Guide(s) relevant to
your audio engine(s) for further instructions.