SMART SPM4000-SS, Инструкция по эксплуатации

Страница: 11 / 24

12
Trouble Shooting
Note: If the problem persists, please contact our customer service.
Care & Maintenance
1. Disconnect appliance from the power supply before cleaning.
2. Keep appliance dry at all times.
3. When not in use, store appliance in a well-ventilated and dry environment.
4. Clean after each use.
5. Clean the main unit with a slightly damp cloth only.
Other parts can be cleaned with water.
6. After cleaning, air-dry the parts before storage.
ENGLISH
Incident Possible Reasons Corrective Action
Power connected. Power button
pressed. Appliance does not operate.
1. The power plug is not fully inserted.
2. Due to extended operation,
the appliance has been
shutdown for protection.
3. Faulty fuse.
1. Make sure the power is
properly connected.
2. Restart appliance after 20-30 mins.
3. Replace fuse.
During the first few operations a
smell emanates from appliance.
This is normal for new motors. If the smell persists after a few uses,
contact our customer service centre.
Abnormal vibration and noise.
The extrusion rod is not installed
correctly / The extrusion nozzle is
installed incorrectly / The locking
collar is not screwed properly.
Check the extrusion rod,
extrusion nozzle and locking
coller, then reinstall them.
Creaky noise when appliance
is in operation.
The seal ring inside the kneading
chamber is not well lubricated.
Add a drop of edible oil to the seal ring.
The control panel displays 'EO'
The dough is too dry or there
is too much dough.
Move the dough back into the
kneading chamber, add an adequate
amount of water, or reduce the amount
of dough and restart the process.