USB Port
Volume
Adjustments
Standby
Input
Mute
Connecting 4K/UHD devices
The SMART Board Interactive Flat Panel has
one HDMI
and
one USB-B
port on the panel that support
4K/UHD
resolution
. You can add a second
HDMI
and
USB-B
port by
installing the supplied XTM module. (The XTM module input
supports only
1080p
resolution.)
To connect a room computer at 4K/UHD resolution
1. Using the
USB
and
HDMI
cables, connect the room
computer to the display connectors.
2. Select
Input
on the front panel and
navigate to
HDMI
.
Note:
The panel’s side USB-A port is not enabled in the
room computer configuration described above.
To connect a guest laptop at 1080p resolution
1. Connect an
HDMI
cable to the interactive flat panel and
the guest laptop.
2. Connect a
USB
cable to the interactive flat panel and
the guest laptop.
3. Select
Input
on the front panel and navigate to
OPS/HDMI.
SMART Board
®
interactive flat panel
Waking up the interactive flat panel
The interactive flat panel has a presence detection
sensor that can detect people up to 16
´
(5m) away when
the interactive flat panel is in Standby mode. When the
sensor detects people, the interactive flat panel turns on
and displays a welcome screen, and touching the screen
activates the panel. The welcome screen disappears after
six seconds.
If the sensor doesn’t detect people in the room for a
while, the interactive flat panel returns to
Standby
mode.
If the panel is off, press the
Standby
button on the front
control panel to turn it on.
Control Panel
