Smart Charger
SBC - 8168
User’s Manual
Introduction
The SBC-8168 is a 4 Stage switch mode charger with MCU controlled constant current pulse Bulk,
PWM (Pulse Width Modulation) Absorption and PWM Float / Maintenance charge. It is suitable for all
types of 12V lead acid batteries including GEL and AGM. It can recondition lightly sulphatd lead acid
battery. Though it is primarily designed for indoor use, it has a splash proof sealed Polycarbonate
casing.
**Please read this manual carefully and follow the instructions**
Features
1.
4 Stage Charge with constant current pulse Bulk, PWM Absorption & Float.
A.
Check & Qualifying battery to Desulphate Pulse Charging.
B.
Constant current pulse Bulk charge
C.
PWM Absorption charge
D.
PWM Float / Maintenance charge.
2.
Motorcycle, Cars, and Low Temperature (less than 10°C) Charge Modes
3.
Select and forget operation and can be connected to battery for months.
4.
Auto recover to last selected Charge Mode on return from AC power blackout.
5.
Electronic wrong battery connection, short circuit protections
6.
Over temperature protection from decrease in output current to shut down.
7.
The Microprocessor unit (MCU) controls charging and monitors battery state of charge with
advanced PWM charging which makes it faster and saver charge your battery without
overcharging or undercharging.
Contents
●
Smart Charger with lead connector
●
Detachable leads with protection cover & crocodile clips
●
Detachable leads with protecion cover & ring terminals
