SMART radio 9, Руководство по эксплуатации, Страница: 12 / 28

Volume Settings
The set volume applies to both radio mode
and CD mode.
Adjusting the Volume
X
To raise the volume: turn the control
knob clockwise.
X To lower the volume: turn the control
knob anti-clockwise.
Loudness
If the loudness function is activated, the
volume of the lower and the higher audio
frequencies is increased relative to the
volume of the mid-range frequencies. The
sound experience is thus intensified,
especially when playing back music at
comparatively low volumes.
This function is only available in FM radio
mode and in CD mode. The function is not
active during traffic announcements.
X Press the MENU button.
X Press the
ý
or
þ
arrow button
repeatedly until the menu for
activating/deactivating the loudness
function appears.
X
To activate/deactivate the loudness
function: turn the control knob clockwise
or anti-clockwise.
X To store the setting: press the control
knob.
Mute
When in radio mode, the mute function
mutes the radio.
In CD mode, the mute function pauses the
CD.
Switching on Mute
X Press the MUTE button.
The radio is muted or the CD is paused.
MUTE
appears in the display.
Switching off mute
X Press the MUTE button again.
Mute is deactivated or the CD reverts to
playback.
Sound settings
The sound settings can be adjusted
individually for FM radio mode, AM radio
mode, CD mode and AUX mode. The sound
settings are automatically stored every
time you change them. The bass and treble
settings allow you to adjust the intensity
of the sound according to the type of music
being played. The balance settings allow
you to adjust the stereo sound to the left or
right within the vehicle. In the default
setting, the balance is set to the center of
the vehicle.
Factory Settings
If desired, you can reset the sound settings
to the factory settings (sets all values to
0).
X Press and hold the BASS/TREB button.
10
>> At a Glance.
audio_ZA; 1; 6, de-DE
sabbaeu,
Version: 2.11.4
2008-11-10T16:22:06+01:00 - Seite 10