Statement of Compliance
smart PORTAL-STICK PX1
11
4.
Select your network and press
OK
. Beside the network
connection you should insert your key / password.
5.
Insert your WLAN key with the numeric keys of the remote
control and press
OK
, in order to confirm your entry.
6.
Press the
green function key
. The receiver connects with
the network. At the top of the screen it is indicated if the
connection is established successfully.
7.
Press the
red function key
, in order to go back to the
previous window.
Select
Status
, in order to open the Status window (see
above).
Select
Network service
, in order to activate a network
quality control.
5
Statement of Compliance
Smart electronic GmbH, Industriestraße 29, 78112 St. Georgen,
Germany, hereby states that this product complies with the
following directives and standards:
RTTE Directive 1999/5/EC
ETSI EN300328: V1.7.1
ETSI EN301489-1: V1.8.1
ETSI EN301489-17: V1.3.2
EN50371:2002
Low Voltage Directive (LVD) 2006/95/EC
EN 60950-1:2006
