SMART Notebook 10, Руководство пользователя

Страница: 9 / 23

8 | P a g e
Precautions
1. Do not blow smoke, food, or liquids into the Smart Breathalyzer 1.0 as this will damage the
sensor.
2. Do not test in areas with strong winds, smoke, or in an area where a large amount of alcohol
is being consumed.
3. Charge the device when you see battery low indication.
4. Send your tester in for periodic calibration service as required.
5. The Smart Breathalyzer 1.0 is designed to be used in a temperature range of (20-36)°C.
7. Avoid testing in the presence of any substances that contain methyl alcohol, isopropyl
alcohol or acetone. These substances may interfere with the results of the test.
8. For Hygiene reasons, use a new mouthpiece for each test subject.
9. You cannot use the results of this product in court. You have to send the person who caught
drunk to do a blood test.
10. Do not use the Smart Breathalyzer 1.0 as a tool to determine whether you should operate a
motor vehicle or equipment, or perform any other dangerous act.
10. Do not drink and drive. Always have a designated driver when alcohol is being consumed.
Requirements for the Test Subject
Before sampling, the test subject should breathe normally and calmly. The test subject must be
able to provide the required minimum respiratory level. For this purpose, the breathing flow
must be constant for a certain minimum blowing period. When the deep lung air comes out the
breath rate will be in a constant range. That will be the minimum blowing period.