SMART MX Series, Инструкция по установке и обслуживанию, Страница: 74 / 90

APPENDIX B
ADJUSTING DISPLAY SETTINGS
62 smarttech.com/kb/171257
Option Values Function Notes
Automatically check for
updates Enable
Disable
Enables or disables checking and
downloading updates for the
display’s firmware Enabled by default.
If this is disabled, manually check
for updates in
Update below.
Power saving mode Enable
Disable
Enables or disables power saving
mode Enabled by default.
When enabled, power saving mode
activates after 90 minutes of
inactivity.
Enabling Power saving mode
makes RS-232 control of the display
unavailable until the display is
turned on using the power button
on the front control panel .
Update
Option Values Function Notes
Firmware version [N/A] Shows technical information about
the display’s scalar firmware. To see the firmware version use
the About option (see
About on the
facing page.
Update [N/A] Checks for updates to the system
software If an update is available, the text
changes to Apply update now.
NOTE
The display must be connected
to the Internet to check for
system software updates. Check
the display’s network settings.
To check the network settings,
see
Network on page 59.
Recovery
Option Values Function Notes
Restore user settings [N/A] Resets any options the user may
have changed [N/A]
Restore factory settings [N/A] Resets all options to their default
values Only administrators should reset
the display.