CHAPTER 7
MAINTAINING THE DISPLAY
38
can purchase replacement pens from the Store for SMART Parts
(see
smarttech.com/Support/PartsStore
).
Turning the display off and back on
In most situations, you can put the display to sleep when not using it following the instructions in the
SMART Board MX series interactive displays user’s guide
).
In some situations, such as when you need to transport the display or clean its screen, you need to
turn the display off for a period of time. You can turn it back on after.
To turn the display off
1. Press and hold the
Power
button
on the front control panel for two seconds.
To turn the display back on
Press the
Power
button
on the front control panel.
Resetting the display
You can reset the display and the iQ appliance using the switch on the back of the panel.
To perform a factory reset, see
on page 62. A factory reset returns all options to their
default values.
To reset the display
1. Flick the switch to the OFF (O) position.
2. Flick the switch to the ON (|) position.
The display and iQ appliance reset.
Removing and transporting the display
If the display is wall mounted, you might need to remove it from its current location and transport it
to another location on occasion.