Hax Series Hanging Scale
13
6.2
EXTERNAL USER CALIBRATION
(Refer Service Manual)
1
Press and hold the Tare/Zero button while
switching on the scale. You will see “CAL”
on the display.
2
Press the Tare/Zero button once, you will
see “noload” on the display momentarily
and then the display will show some
internal counts.
3
Press the Tare/Zero button once, you will
see”load” on the display momentarily and
then the display will show some internal
counts
4
Now hang a known weight on the hook of
the scale say 10 kg and press the Tare/Zero
button and the display will show all zeros
with the right most zero digit blinking, now
enter the value of the hanged weight using
key “M+” to up/change the value and
“Hold” key to shift the blinking digit to right
5
Press the Tare/Zero button and the display
will show “END” now press the Tare/Zero
button once more and the display will
show the hanged weight. Check
calibration.
Hax Series Hanging Scale
14
7
ERROR CODES
ERROR – DISPLAY
Error
Solution
Zero not in range
Remove weight from pan
and restart the machine. If
the problem persists, the
machine may have been
overloaded.
Weight not enough for
the selected setting
Keep weight or Add more
weight on pan for correct
results.
Internal
/
External
calibration
variance
larger than 2%
You are trying to calibrate
the scale with a incorrect
weight.
LOW Battery. Machine
displays message and
turns off
Battery is low. Connect scale
to power so that the battery
can be charged.
