SMART fortwo cabriolet, Руководство оператора

Страница: 64 / 196

i
If you drive in countries where
vehicles drive on the other side of the
road than the country in which the
vehicle is registered, you must have the
headlamps modified for symmetrical low
beams. Relevant information can be
obtained at any authorized electric
drive smart center.
$
Lamps off
Daytime running lamp mode
T
Parking lamps
L
Low‑beam headlamps or high‑beam
headlamps
Parking lamps
You can switch on and off the parking lamps
with the exterior lamp switch using the
manual headlamp mode.
X Switching on: Turn the exterior lamp
switch to position
T .
The parking lamps come on.
The following lamps also come on:
R
Tail lamps
R
License plate lamps
R
Side marker lamps
Low‑beam headlamps
You can switch on and off the low‑beam
headlamps with the exterior lamp switch
using the manual headlamp mode.
X
Switching on: Turn the exterior lamp
switch to position
L .
The low‑beam headlamps come on.
The low‑beam headlamp indicator lamp
M in the instrument cluster comes on.
The following lamps also come on:
R
Tail and parking lamps
R
License plate lamps
R
Side marker lamps
Daytime running lamp mode (Canada only)
In Canada, the daytime running lamp mode
is mandatory and therefore in a constant
mode.
X Turn the exterior lamp switch to position
$
.
i
With the ignition is switched on, the
low‑beam headlamps cannot be switched
off manually.
You cannot switch on the high‑beam
headlamps.
The high‑beam flasher is available at all
times.
For nighttime driving you should turn the
exterior lamp switch to position
L
to
permit activation of the high‑beam
headlamps.
When the ignition is switched on, and you
R
turn the exterior lamp switch to position
T , the low‑beam headlamps, the tail
and parking lamps, the license plate
lamps and the side marker lamps come on
R
turn the exterior lamp switch to position
L
, the manual headlamp mode has
priority over the daytime running lamp
mode.
The corresponding exterior lamps come
on (
Y
page 61).
Daytime running lamp mode* (USA only)
In the USA, the daytime running lamp mode
is deactivated by default.
62
Lighting
>> Controls.
* optional